Digiguard H.264 Digital video recorder -4/8/16 channel models Instrucciones de operaciones descargar pdf (Pagina 170)

6 - 9

MAN0443.P65 Issue 13 Aug 04 5701 Control System

05701-M-5001 A02279

CHAPTER 6 - OPERATING INSTRUCTIONS

(2) Push the CLOCK push-button and the selected

channel card display will indicate the present time.

Note: The clock uses the 24 hour format.

(3) Push the CLOCK push-button a second time and the

selected channel card display will indicate the present

day, month and year.

Notes: 1. The display format for day and month can read

either DD.MM or MM.DD depending on the

configuration of the system.

2. Further pushes of the CLOCK push-button will

toggle the display between time and date.

(4) Push the ( ) or ( ) push-buttons or wait 30 seconds to exit the

CLOCK mode.

4.8 Maintenance Record Print Out

A detailed printout of the status for each channel or a summary of the

whole rack can be initiated using the Engineering Card. The data is fed

in ASCII text format to the engineering serial port on the Engineering

Card front panel.

To output the maintenance record for each channel card, proceed as

follows:

(1) Plug a RS232 printer into the Engineering card serial port.

(2) Push and hold the required channel card RESET/SELECT push

button for approximately 1.5 seconds until the selected icon appears

on the channel display.

(3) Push the up ( ) and down ( ) buttons simultaneously. The selected

channel card will display PRN while outputting the following data:

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 212 213

Sin comentarios

Digiguard H.264 Digital video recorder -4/8/16 channel models Instrucciones de operaciones Pagina 170