Digiguard H.264 Digital video recorder -4/8/16 channel models Instrucciones de operaciones descargar pdf (Pagina 81)

4 - 18

MAN0443.P65 Issue 13 Aug 04 5701 Control System

05701-M-5001 A02279

CHAPTER 4 - INSTALLATION INSTRUCTIONS

10. RACK INSTALLATION

The 16-way 3U high rear access and 6U high front access racks are

suitable for mounting in standard 19" (483mm) wide Mounting Frames.

These are fitted as follows:

(1) Insert the rack into the 19" Mounting Frame and secure using M6 or

similar bolts through the four mounting holes located on the front

flange plates.

(2) Ensure adequate support at the rear of rear access racks.

(3) Prepare and connect the cable ends to Field Interface and Relay

Card terminals. For terminal identification see Chapter 2. Where

possible keep sensor cables separate from the other wiring.

(4) Ensure that the rack is properly earthed by connecting a suitable

earth cable to the earth stud located at the rear of the rack.

CAUTION

Do not apply power to the System 57 until the commissioning

procedure has been read and understood. See Chapter 5.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 212 213

Sin comentarios

Digiguard H.264 Digital video recorder -4/8/16 channel models Instrucciones de operaciones Pagina 81