Digiguard H.264 Digital video recorder -4/8/16 channel models Instrucciones de operaciones descargar pdf (Pagina 179)

7 - 6

MAN0443.P65 Issue 13 Aug 04 5701 Control System

05701-M-5001 A02279

CHAPTER 7 - ENGINEER'S OPERATING

INSTRUCTIONS

4. SELECTED CARD OPERATIONS

The operation to be carried out on the selected control card is chosen by

pushing one of the following Engineering Card control push-buttons:

Once an operation has been selected, there are four control push-buttons

which may be used to manipulate the operation as required. These are:

a. The up push-button, which may be used to raise the selected

control card indicted value. If held in the operated position, the

display will be increased by one unit every 0.5 seconds.

b. The down push-button, which may be used to lower the selected

control card indicated value. If held in the operated position, the

display will be decreased by one unit every 0.5 seconds.

c. The accept push-button, which may be used to accept the selected

control card displayed value and store this permanently as part

of the configuration. Returns the control card to the selected

mode.

d. The reject push-button, which may be used to reject the selected

control card displayed value and return to the previous set value.

Returns the control card to the selected mode.

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 212 213

Sin comentarios

Digiguard H.264 Digital video recorder -4/8/16 channel models Instrucciones de operaciones Pagina 179