Digiguard H.264 Digital video recorder -4/8/16 channel models Instrucciones de operaciones descargar pdf (Pagina 186)

7 - 13

MAN0443.P65 Issue 13 Aug 04 5701 Control System

05701-M-5001 A02279

CHAPTER 7 - ENGINEER'S OPERATING

INSTRUCTIONS

(7) The selected control card will display oooo on the message display

while the Control Card carries out the following:

a. Zeroes itself at the current sensor signal, providing this is within

the configured upper and lower zero signal limit values. The

control card will then automatically return to the normal selected

state.

b. If the signal is outside the stored signal limits an error message

will be displayed on the selected control card display.

c. Automatically return to the normal selected state, however, the

inhibit on the control card will remain active.

(8) If the Span Signal Calibration (Section 9) is not to follow this procedure,

remove the inhibit.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 212 213

Sin comentarios

Digiguard H.264 Digital video recorder -4/8/16 channel models Instrucciones de operaciones Pagina 186